Pipeline Armature

Valsteam offers wide range of pipeline armature. Thanks to large experience in the fields of metallic and mechanical construction and the assembly of fluid networks, company makes high class steam traps, pressure reducing valves and control valves.

To get more information please expand the product block by pressing on image or product title. To get detailed information about specific product you can download Technical datasheet file by clicking corresponding link.

Steam Traps

Valsteam Adca provides a complete range of steam traps using different materials, from DN15 to DN 150, designed for pressure up to 80 bar and flow rates of over 100,000 Kgs/h.

DT Series

 

Thermodynamic steam traps are compact and lightweight-easy to install traps, excellent for high pressure systems, including steam tracing applications.

 

 

 

 

FLT Series

 

Float and thermostatic steam traps series are designed for all types of low and high pressure steam heating and process equipment.

 

 

 

 

TH and TSS Series

 

Thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.

 

 

 

 

BS, BSS and BM Series

 

All stainless steel bimetallic steam traps and air eliminators are simple and robust traps, specially suited for instrument tracing, line tracing applications and where condensate sensible heat can be recover. It is specially recommended as air eliminator.

 

 

 

 

IB and IBB Series

 

Inverted bucket steam traps are recommended for all services where the most important requirements are overall operating efficiency and long, trouble-free service life.

 

 

 

 

CDV 32

 

CDV 32 Condensate drain valve automatically drains condensate from steam systems during start-up. A compression spring inside the governor keeps the valve open if the appliance stays without pressure.

 

 

 

 

Pressure Reducing Valves

Pressure reducing valves are essential components for the majority of fluid distribution systems. Valsteam Adca provides you with a wide range of options, varying from the simplest direct action valve to the more sophisticated pilot operated valve, in different types of construction.

PRV Series

 

Stainless steel-direct acting pressure reducing valves. They are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc. Connections are female screwed or flanged.

 

 

 

 

RP, P and RPV Series

 

Pressure reducing valves (threaded). They are particularly suitable for reducing steam pressure in all energy and process systems where pressures should be kept constant.

 

 

 

 

PRV 47

 

Pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases compatible with the construction and they can be installed on pressure reducing stations throughout all industries.

 

 

 

 

PRV 300

 

The ADCA PRV300 series direct acting, spring-loaded diaphragm sensing, balanced plug pressure reducing valves, are designed for use on compressed air, water and other gases or liquids compatible with the materials of construction.

 

 

 

 

PS Series

 

In general these valves maintains the upstream pressure under control. They are suitable for pressure sustaining applications where small loads are involved.

 

 

 

 

Control Valves

Adcatrol valves offer a wide range of solutions for controlling temperature, level, pressure and humidity. Adcatrol valves can be offered with electric or pneumatic actuators including positioners, transmitters, limit switches, amongst many other options.

PA205-PA435 and PA45

 

Pneumatic multi-spring linear actuators PA series for modulating and open-close duty of control and process technology to operate control valves.

 

 

 

 

EL Series

 

Universally usable actuators due to control via 3-point-step controllers, analogue input signals (0…10 V, 0 (4)…20 mA) or fieldbus systems.

 

 

 

 

Type ELR2.1/2/3

 

The actuators are in enclosure protection IP 54 and are designed for rugged industrial use.

 

 

 

 

PE 986

 

Positioner requires an input signal of 4÷20 mA for proportional control actuator. The positioner compares the output signal from a controller with the position feedback, and varies a pneumatic output signal to the actuator accordingly.

 

 

 

 

PP 981

 

Positioner requires an input signal of 0,2÷1bar (3÷15psi) for proportional control actuator. The positioner compares the output signal from a controller with the position feedback and varies a pneumatic output signal to the actuator accordingly.

 

 

 

 

PI 991

 

Designed to control pneumatic valve actuators and can be operated locally or by means of control systems.

 

 

 

 

SPS 32/20

 

Controllers is used to measure the conductivity (TDS) of the superheated water of boilers or condensate.

 

 

 

 

BCS 210

 

The system measures the conductivity of the water based on the type of steam generator. When it exceeds a predefined value, drives the blow-down valve by ON/OFF or time proportional control with the purpose of maintaining the water in an optimum TDS value.

 

 

 

 

VPA 26S/26

 

The blowdown valves were specially designed for application on steam boilers removing the concentrations of solids avoiding boiler damages, unstable water level control and other typical problems.

 

 

 

 

VPC Series

 

The Adcatrol VPC series control valves are specially designed for the blowdown of steam boilers in order to control the TDS concentration in combination with a TDS controller (BCS) and probe (SPS series).

 

 

 

 

OVF 40

 

Overflow (by-pass) valves are single seated, two-way body constructed with in-line straight connections.

 

 

 

 

TR Series

 

Valves are designed for direct acting temperature control systems where the valve closes on temperature rising.

 

 

 

 

PV, PVW and PV Series

 

Control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multisprings.

 

 

 

 

PV 403/253G

 

Control valves are three-way valve body both for mixing service or diverting service. The PA pneumatic actuator is rubber diaphragm and multisprings. Its action can be DA -direct action (air to close) or RA-reverse action (air to open).

 

 

 

 

PC 25

 

Instrument for conversion of a standard d.c. current signal into a standard pneumatic signal, for the changeover from electrical controllers to pneumatic control valves or from electrical measuring system to pneumatic controllers.

 

 

 

 

PPV 25I/16 and PV 16

 

The on-off valves are single seated, two-way body constructed with in-line straight connections.

 

 

 

 

P10

 

Air filter regulators are used to remove both solid and liquid impurities from the air and to regulate the output pressure to the required value for general purpose pneumatic systems.

 

 

 

 

PAV 21

 

The PAV series angle seat interception valves are designed for steam, gas and other fluids used on the process industry and they are the effective response to fluid interception when flexibility and cost is requested.

 

 

 

 

Other products from this manufacturer