ADCA PureRange of products for clean steam and industrial gases and fluids, designed for the pharmaceutical, food, chemical and cosmetic industry. To get more information please expand the product block by pressing on image or product title. To get detailed information about specific product you can download Technical datasheet file by clicking corresponding link. Sanitary Tank Blanketing RegulatorsTank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions, to control product contamination against external air that may fill the vapour space, to reduce evaporation losses, to reduce internal corrosion and to prevent vacuum condition. BKR and BKV Series | | | The blanketing process consist in covering the stored medium, usually a liquid, with a gas (normally N2). |
Highlights - Compact design
- Completely machined from barstock material, no castings or forgings used on the standard version
- No rising stem
Techical datasheet : BKR (DN 25).pdf
| | | | |
Sanitary Pressure Reducing ValvesThe ADCA P-130 series pressure reducing valves, are designed for use on compressed air, water and other gases or liquids compatible with the materials of construction. P and PS Series | | | Completely machined from barstock material, no castings or forgings used on the standard version. |
Highlights - Compact design
- Clamp ends or others on request
- No rising stem
Model | Options | Use | Size | Connections | P-130 | Self relieving. Leakage line connection 1/8" (captured vent). Panel mounting version (thread M45). Gauge connection on body. Different soft valves for liquids and gases. Casted cover (CF8M) with rising stem handwheel for economic reasons. Special execution for steam | Compressed air, water and other gases and liquids compatible with the construction | DN1/2" to DN 1" ; DN15 to DN25 | Clamp ends or others on request | P-160 | Leakage line connection 1/8" (captured vent). Different soft valves for liquids and gases. Casted cover (CF8M) with rising stem handwheel for economic reasons. Lock system, allows clean-in-place (CIP) and sterilization-in-place (SIP) operations with valve in line | Clean steam, compressed air, water and other gases and liquids compatible with the construction | DN3/4", 1", 11/2", 2" ; DN 20, 25, 40, 50 | Clamp ends or others on request | PS-160 | Leakage line connection 1/8" (captured vent). Different soft valves for liquids and gases. Casted cover (CF8M) with rising stem handwheel for economic reasons | Clean steam, compressed air, water and other gases and liquids compatible with the construction | DN3/4", 1", 11/2", 2" ; DN 20, 25, 40, 50 | Clamp ends or others on request |
Techical datasheet : P130.pdf
| | | | |
Control ValvesValves have been designed to assure an accurate control in any process condition. The self draining design is ideally suited to applications in clean steam service. PV 928 | | | The PV928 are two or three way control valves with angle connections, specially designed for food, chemical pharmaceutical and cosmetic industries among others. |
Highlights - Quick disassembling through clamp body bonnet coupling
- Metal to metal or soft sealing
- Self draining design
Techical datasheet : PV928 (DN15-100).pdf
| | | | |
PV 922 and PV 926 | | | Control valves are single seated, two-way body constructed with angle connections. The PA pneumatic actuator is rubber diaphragm and multisprings. |
Highlights - Single seated, two way, direct or reverse action valve
- Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator
- Metal to metal or soft sealing
- Self draining design
Techical datasheet : PV922 (DN 15-50).pdf
| | | | |
Humidity SeparatorsWhen wet steam is used in sterilization, moisture in suspension reduces the heat transfer's efficiency and validity of the sterilization process can be compromised. S 10 | | | S 10 series centrifugal separators remove moisture from steam pipelines. Steam passing through the separator and as a result of centrifugal forces, impact and swirling effects, separate the particles with a heavier specific gravity, such as water droplets and moisture in suspension. |
Highlights - 316L stainless steel construction
- Several possibilities of installation
- No moving parts
- Self draining design
Techical datasheet : S10 (DN 15-50).pdf
| | | | |
Sample CoolersADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. SC 32P | | | Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and will result in an incorrect water sample. |
This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials. Highlights - Corrosion-resistant body and internals
- Self draining sample (inlet top, outlet bottom)
- Surface finish of sample tubes internal area : 0,5 μm Ra
Techical datasheet : SC32P.pdf
| | | | |
Balanced Pressure Thermostatic Steam TrapAll stainless steel thermostatic steam traps and air eliminators are specifically designed for use in reactors, sterilizers and distribution lines in clean and pure steam systems. TSS Series | | | The small size makes it ideal for use with a wide variety of this equipment. |
Highlights - Modulating discharge
- Wide range of connections options
- Excellent air discharge
- Simple and compact design
Techical datasheet : TSS6 (DN 15-25).pdf
| | | | |
Other products from this manufacturer |