ОтраслиПродуктыБренды

 

 

Industrial Pumps

For over 80 years SIHI has been a leading manufacturer of innovative technologies for chemical process pumps, industrial standard pumps, heat transfer pumps, side channel pumps, high pressure pumps, sealless pumps, hygienic pumps and sludge mixers.

Для получения более подробной информации, нажмите на изображение или заголовок продукта. Для получения полного описания характеристик выбранного продукта, скачайте файл технической документации, нажав на соответствующий линк.

Heat Transfer Pumps

Horizontal and vertical volute casing pumps according hot water and hot oil applications.

ZHN, ZDN, ZEN

 

In inline design, volute pumps are part of the overall programme heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.

 

 

 

 

ZLI

 

In bare shaft design, volute pumps of the series ZLI belong to the programm of heat carrier circulation pumps. These pumps have been constructed as space saving and easy to install pumping units with standard motor.

 

 

 

 

ZTK

 

Pumps have in compact design. When developing the unit construction type volute pumps of series ZTK, the main objective has been to turn out a number of floor space saving, easy-installation types especially adapted to the circulation of mineral and synthetic heat carriers.

 

 

 

 

ZTN

 

In bare shaft design, volute pumps of the series ZTN have been specially developed for handling of mineral and synthetic heat transfer oils. The pumps may be used in installations with positive or negative suction pressure.

 

 

 

 

ZTI

 

In inline design, volute pumps of the series ZTI have been developed as space saving and easy-to-install pumping units, especially for the circulation of mineral and synthetic heat carriers in: primary, secondary, tertiary circuits.

 

 

 

 

Chemical Process Pumps

Chemical process pumps are used in a wide variety of process applications and due to their high reliability they provide reduced operating costs in the process industry.

SIHI ISOchem CBS, CBM, CBE

 

Standard chemical pumps of the SIHI ISOchem range are horizontal single-stage volute casing pumps with dimensions to ISO 2858 / EN 22858.

 

 

 

 

Series CBT

 

Series CBT volute-casing pumps can be used where the requirement is for pumping of clear or slightly dirty or even corrosive liquids.

 

 

 

 

Series DBS

 

Series DBS volute-casing pumps can be used where the requirement is for pumping dirty liquids or liquids with solids.

 

 

 

 

Industrial Standard Pumps

The industrial standard pumps are available in a number of different materials and are suitable for a wide range of industrial applications, offering high reliability, high efficiency, low NPSH, resulting in low operating costs.

Series ZLN

 

In bare shaft design, volute casing pumps of the ZLN range (meeting DIN 24255 / EN 733 and ISO 9908) are used when clear or turbid liquids free from solid particles are to be pumped.

 

 

 

 

Series ULN

 

In bare shaft design, the self-priming volute casing pumps according to DIN 24255 of the series ULN are applied when it is necessary to suck in and to handle without problems and automatically, pure resp. turbid not aggressive liquids which do not contain any solids.

 

 

 

 

Series SPL

 

In bare shaft design, series SPL volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the large internal cross sections.

 

 

 

 

Series ZLK

 

In compact design, volute casing pumps according EN 733.

 

 

 

 

Series ZLIC

 

In inline design, inline based volute casing pumps according EN 733.

 

 

 

 

High Pressure Pumps

SIHI horizontal, multi-stage centrifugal pumps according to ISO 5199 / EN 25199.

Series SIHImulti MSL, MSM

 

SIHImulti pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199.

 

 

 

 

Series SIHImulti MSC

 

The SIHImulti MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.

 

 

 

 

Series SIHImulti MSH

 

SIHImulti pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199.

 

 

 

 

Series UEA

 

Gas handling centrifugal pumps of the series UEA are used for trouble-free handling of pure or turbid, not aggressive liquids, containing no solids.

 

 

 

 

Series TKH

 

The self-priming centrifugal pumps of series TKH/TLH are used, when clear or turbid liquids, free from solid particles, are to be handled reliably and trouble-free.

 

 

 

 

Hygienic Liquid Pumps

Hygienic centrifugal pumps are used within the food and beverage industry such as breweries and dairies. Applications areas for these pumps include brewing, dairying, filtration, cleaning, filling, sterile and pure water.

Series NHK and SKH

 

The NHK and SHK range are in accordance with food-grade standards 3A1 with a surface roughness Ra ≤ 3,2 μm. The Modular and compact design, the use of standard motors and several options guarantee a reliable performance within the food and beverage industry.

 

 

 

 

Другие продукты данного производителя