OPTISENS Analysis Measurements

With the broad range of analytical measurement technology from OPTISENS series, KROHNE Analytics supplements the measurement of the physical parameters of flow, level, and temperature. The new ASR (automatic sensor cleaning) process creates outgassing on the electrode surfaces of the OPTISENS 1000 chlorine sensor.

Для получения более подробной информации, нажмите на изображение или заголовок продукта. Для получения полного описания характеристик выбранного продукта, скачайте файл технической документации, нажав на соответствующий линк.

OPTISENS series

Modular analysis product line for tailored solutions in water and wastewater industry as well as secondary, wastewater and sludge treatment processes in other industries.

OPTISENS OAM 1050
The compact turbidity measuring system OPTISENS OAM 1050 uses the 90° scattered light method to scan liquid samples in glass cuvettes.
Highlights 90° scattered light method according to ISO 7027 / US EPA 18 Measuring range: 0…100 NTU/FNU (0…1000 NTU/FNU optional) Rapid response time due to small measurement volume Simple calibration with reusable liquid calibration standards Automatic ultrasonic cleaning to prevent mineral deposits Compact, space-saving design Integrated shut-off valve for maintenance work Optimal back pressure setting to avoid gas bubbles through integrated outlet valve Active current output / 2 alarm relays RS 485 / Modbus interface Отрасли Potable water treatment Water supply Process industry Applications Monitoring the potable water quality Filter monitoring Monitoring of contamination Файл технических данных : OPTISENS OAM1050.pdf

OPTISENS AAM 1100
In the OPTISENS AAM 1100, free chlorine is measured by a sensor with a three-electrode design, which has very long lifespans, thanks to the patented ASR cleaning system.
Highlights Preinstalled and tested, ready for connection No sample preparation or adding of reagent required Direct measurement using innovative sensor in 3-electrode design ASR automatic sensor cleaning Continuous monitoring of the sample flow Integrated sampling point for easy calibration Integrated shutoff valves for safe maintenance of the flow assembly Optional pH measurement as compensation for strongly deviating pH values Optionally 2 independent P, PI, PID controller Отрасли Drinking water treatment Water supply Process industry Food industry Applications Disinfection of clean water Monitoring of chlorine as a growth inhibitor Product disinfection

OPTISENS PAS 1000
The PH and ORP electrodes (oxidation reduction potential) PAS 1000 can be ideally adapted to the application thus also making these electrodes extremely service friendly and durable.
Highlights Suitable for connection to the OPTISENS°050 converter Membranes made of highly sensitive special glass (pH) Ring electrodes made of ultrapure, solid platinum (ORP) Various diaphragm materials Design as combined electrode with built-in reference electrode Standardised design and connections Optional: built-in temperature sensor Отрасли Water industry Power plants Food & Beverages Metal industry and mining Paper industry Chemicals Applications Generally in all water applications Monitoring and control of water neutralisation processes/disinfection Quality control of water (including steam and cooling water) Process control Dosage of flocculation agents Файл технических данных : OPTISENS PAS1000.pdf

OPTISENS CAS 1000
The Conductivity sensors (conductive) CAS 1000 are perfect for low-contaminated, non-corrosive media such as pure water, steam and cooling water.
Highlights Suitable for connection to the OPTISENS 050 converters Conductive measurement with two stainless steel electrodes Available with cell constants c = 0.05, c = 0.2 and c = 1.0 Integrated temperature sensor (Pt100) Standard design for all cell constants Long lifespan Отрасли Water industry Power plants Food industry Metal industry and mining Paper industry Chemicals industry Applications Quality control of steam and cooling water Monitoring of filters / ionic exchangers Quality control of ultrapure water, drinking water Файл технических данных : OPTISENS CAS1000.pdf

OPTISENS OAM 2080
The OPTISENS OAM 2080 sludge blanket measuring system allows accurate and reliable measurement of the blanket depth and the fluff zone (separation zone) in primary and secondary clarifiers or sludge thickeners.
Highlights Direct measurement of consistency via optical suspended solids sensor Pre-calibrated sensor Low maintenance due to automatic flushing of sensor and cable Measures sludge blanket and fluff zone (separation layer) IP55 enclosure and built-in heater for outdoor installations Digital sensor technology: reliable signal transmission, self-recognition of sensor Complete system with multiparameter converter OPTISENS MAC 080, all mounting accessories included Отрасли Waste water Applications Measurement of sludge blanket and fluff zone in primary and secondary clarifiers or sludge thickeners Automation of sludge extraction Early warning of sludge washout Monitoring of sedimentation process Файл технических данных : OPTISENS OAM2080.pdf

OPTISENS PAM 2080
The OPTISENS PAM 2080 technology allows insitu measurement of Ammonium NH4 and Nitrate NO3 concentration without need of additional sample preparation or the use of chemicals.
Highlights Optimal cost of ownership Compact system for easy installation Long maintenance intervals between 3-6 month Easy maintenance through simplified electrode exchange Self cleaning through air blast Self monitoring for reliable operation Fast response time through direct and continuous measurement Optimized compensation of Sodium and Chloride matrix changes No moving parts, no chemicals consumption No additional sample preparation or filtration necessary Can be integrated into network with multiple sensors Отрасли Municipal Waste Water Treatment plants Water monitoring stations Applications Monitoring and control of biological treatment Nitrification and Denitrification Sequent batch reactors SBR Aeration control for energy saving Return activated sludge RAS control for NH4 balancing Influent and final effluent monitoring Файл технических данных : OPTISENS PAM2080.pdf

OPTISENS AAS 1000
The membrane free, potentiostatic OPTISENS AAS 1000 sensors for measuring free chlorine, chlorine dioxide, ozone and hydrogen peroxide are characterized by a robust design and extremely low maintenance requirements.
Highlights Suitable for connection to the OPTISENS 050 converter Patented Automatic sensor cleaning (ASR) Membrane free Double gold (or platinum) electrodes Standardised single rod design with integrated counter electrode Low maintenance gel filling Virtually flow independent above 30l/h Отрасли Drinking water industry Waste water industry Process industry Food and Beverages Applications Disinfection of drinking water and process water Product disinfection Monitoring of limit values Файл технических данных : OPTISENS AAS1000.pdf

OPTISENS AAS 2000
The AAS 2000 dissolved oxygen sensor is equipped with digital communication, a stainless steel enclosure, integrated spray cleaning and the mounting option on an extendable telescopic rod.
Highlights Robust stainless steel enclosure Automatic spray cleaning Mounting option on a flexible telescopic rod "Clark" electrode with patented design and Teflon membrane for long lifespans Easily replacable electrode cartridge Wide measuring range 0…20 mg O2/l Automatic temperature compensation Easy to calibrate Digital communication with the MAC 080 converter Up to four OPTISENS 2000 sensors can be connected to one MAC 080 Automatic sensor detection during installation Отрасли Municipal and industrial waste water treatment facilities Water monitoring stations Applications Monitoring and control of water treatment processes Continuous monitoring of the oxygen concentration in aeration basins Monitoring of the water quality of waste water treatment facilities or final effluents Файл технических данных : OPTISENS AAS2000.pdf

OPTISENS OAS 2000
The OAS 2000 suspended solids sensor is equipped with digital communication, a stainless steel body, integrated spray cleaning and flexible mounting options.
Highlights Robust stainless steel enclosure Automatic spray cleaning Mounting option on a flexible telescopic rod Measuring principle using transmission of light Wide measuring range: 0…20000 mg/l (ppm) Independence of the measurement from the sludge colour Automatic temperature compensation Pre-calibrated in the factory for quick installation Digital communication with the MAC 080 multiparameter converter Up to four OPTISENS 2000 sensors can be connected to one MAC 080 Two enclosure versions available: submersible and inline Отрасли Municipal and industrial waste water treatment facilities Applications Monitoring and control of suspended solids content (influent / primary clarifier, secondary clarifier, effluent from thickeners) Aeration basin / SBR / ditch / membrane: MLSS concentration (control of sludge age) Control of RAS (Return Activated Sludge) and WAS (Waste Activated Sludge) Sludge press / centrifuge Файл технических данных : OPTISENS OAS2000.pdf

OPTISENS PAS 2000
The PAS 2000 pH and ORP (oxidation reduction potential) sensors are equipped with digital communication and automated spray cleaning.
Highlights Robust stainless steel enclosure Automated spray cleaning Large diameter sensor holder to avoid ragging Mountable onto the unique flexible telescopic rod Standardized 12 mm combination electrodes with Teflon diaphragma Pluggable electrode holder for easy exchange of the low maintenance Gel-Electrodes Temperature compensation Calibration in a few simple steps Digital communication to the MAC 080 Converter Up to four OPTISENS 2000 sensors can be connected to one MAC 080 Side wall mounting available optional Отрасли Municipal and industrial waste water treatment facilities Water monitoring stations Applications Monitoring and control of water treatment and neutralization processes Outdoor installations for water quality monitoring of well water and final effluents Файл технических данных : OPTISENS PAS2000.pdf

OPTISENS MAC 080
The OPTISENS MAC 080 multiparameter converter allows a reliable and precise measurement of up to four parameters for waste water and sludge applications.
Highlights Support of the complete OPTISENS 2000 Stainless Steel Sensor series with automated cleaning function Up to four measuring channels Digital technology for highest reliability and "Plug & play" installation Rugged design and built-in heater for installations in harsh environments User-friendly operation with only three membrane keys and large graphic display Two relays free programmable Field upgradeable software Optional Profibus DP Modul Отрасли Municipal and industrial waste water treatment facilities Water monitoring stations Applications Monitoring and control of waste water treatment processes Файл технических данных : OPTISENS MAC080.pdf

OPTISENS MAC 100
The multiparameter converter for liquid analytical measurements OPTISENS MAC 100 has a standardised operating concept, which is praxis proven since years in flow and level converters.
Highlights Unified converter platform for analysis, flow and level Unified user interface Unified service philosophy KROHNE General Device Concept (GDC) Standardised operating concept from flow and level extended to analytical parameters Up to 2 sensor inputs + temperature input 3 current outputs Large graphic display Robust aluminium housing (IP66) Build-in temperature and pH compensation Calibration logbook HART (in preparation) Отрасли Water / Waste water Power industry Process industry Food and Beverages Файл технических данных : OPTISENS MAC100.pdf

Другие продукты данного производителя

Electromagnetic Flowmeters Variable Area Flowmeters Ultrasonic Flowmeters Mass Flowmeters Other Flowmeters and Controlers Non-Contact Level Meters Contact Level Meters Other Level Meters OPTIQUAD Analysis Measurements OPTISENS Analysis Measurements (данная страница)Temperature Measurement Pressure Measurement

Отрасли

Продукты

Бренды

OPTISENS Analysis Measurements

OPTISENS series

OPTISENS OAM 1050

OPTISENS AAM 1100

OPTISENS PAS 1000

OPTISENS CAS 1000

OPTISENS OAM 2080

OPTISENS PAM 2080

OPTISENS AAS 1000

OPTISENS AAS 2000

OPTISENS OAS 2000

OPTISENS PAS 2000

OPTISENS MAC 080

OPTISENS MAC 100

Другие продукты данного производителя