Aluminum ProductsTurolla aluminum gear pumps and gear motors are the ideal choice for a wide range of applications from the small to the medium and large off-highway vehicles. To get more information please expand the product block by pressing on image or product title. To get detailed information about specific product you can download Technical datasheet file by clicking corresponding link. Aluminum Gear PumpsTurolla gear pumps are designed to achieve significant improvement in overall efficiency. Use them to power your work functions and see your energy consumption reach a new low. Group 1, 2, 3 and 4 | | | All TurollaOCG gear pumps use hydrodynamic journal bearings that have an oil film maintained between the gear/shaft and bearing surfaces at all times. If this oil film is sufficiently sustained through proper system maintenance and operating within recommended limits a long pump life can be expected. |
Multi-stage pumps are combinations of groups 1, 2, 3 and 4. Modular and short versions give extra flexibility and compactness. Product | Group Level | Flange Size | Displacement cm³/rev (in³/rev) | Rated Pressure bar (psi) | Maximum Speed min-1 (rpm) | TFP0NN | 0.5 | EU2Bolt | 0.25-1.27 (0.015-0.075) | 180 (2,600) | 8,000 | SNP1NN | 1 | SAE A-A EU4Bolt | 1.18-7.59 (0.027-0.463) | 250 (3,625) | 4,000 | SKP1NN | 1 | SAE A-A EU4Bolt | 1.18-12.00 (0.072-0.732) | 250 (3,625) | 4,000 | SNP2NN | 2 | SAE A | 3.9-25.2 (0.25-1.54) | 250 (3,625) | 4,000 | SKP2NN | 2 | SAE A | 3.9-25.2 (0.25-1.54) | 250 (3,625) | 4,000 | SNP3NN | 3 | SAE B | 22.1-88.2 (1.35-5.38) | 250 (3,625) | 3,000 | TAP4NN | 4 | EU4Bolt | 58.1-194.3 (3.55-11.86) | 220 (3,190) | 3,000 |
Techical datasheet : General Aluminum Gear Pumps.pdf
| | | | |
Aluminum Gear MotorsDesigned to operate effectively with high back pressure and extremely low system pressure and able to ensures an excellent starting torque. Aluminum gear motors are an excellent choice for road building, turf care, forklift trucks and municipal applications. Group 1, 2 and 3 | | | Available in three different frame sizes Turolla OpenCircuitGear aluminum gear motors feature high strength extruded aluminum housings and aluminum rear cover and front flange for maximum strength and low weight. |
A broad variety of configurations are available with European or SAE flange options to meet widely varying machine requirements. Product | Group Level | Flange Size | Displacement cm³/rev (in³/rev) | Rated Pressure bar (psi) | Maximum Speed min-1 (rpm) | SKM1NN | 1 | SAE A-A EU4Bolt | 2.62-12.0 (0.158-0.732) | 250 (3,625) | 4,000 | SKM1NN | 1 | SAE A-A EU4Bolt | 2.62-12.0 (0.158-0.732) | 250 (3,625) | 4,000 | SKM1NN | 1 | SAE A-A EU4Bolt | 2.62-7.8 (0.158-0.463) | 250 (3,625) | 4,000 | SNM2NN | 2 | SAE A-A EU4Bolt | 6-25.2 (0.360-1.538) | 250 (3,625) | 4,000 | SNM2NN | 2 | SAE A | 8.4-25.2 (0.513-1.538) | 250 (3,625) | 3,50 | SNM2NN | 2 | SAE A EU4Bolt | 8.4-25.2 (0.513-1.538) | 250 (3,625) | 3,500 | SNM3NN | 3 | SAE B EU4Bolt | 22.1-88.2 (1.35-5.38) | 250 (3,625) | 2,500 | SNM3NN | 3 | SAE B EU4Bolt | 22.1-88.2 (1.35-5.38) | 250 (3,625) | 2,500 |
Techical datasheet : Gear Motors Group 1,2,3.pdf
| | | | |
Other products from this manufacturer |