The CEH-X pumps are used for problem-free pumping of clean liquids at unfavorable suction side conditions. They are also very suitable for positive suction heads below 0.5 m.

The different material possibilities with uniform dimensions and performance characteristics as well as the standard exchangeable components, make the CEH particularly recommendable for applications in:

Because of its low NPSH and positive suction head the CEH-X/CEH is very suitable for the pumping of liquefied gasses and liquids under vapour pressure like condensate, refrigerant, boiler feed water or LPG.

Techical datasheet : CEH-X,CEH.pdf

The Sterling SIHI AEH-X pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Applications

Techical datasheet : AEH-X,AEH.pdf

The AKH-X pumps are used for problem-free pumping of clean liquids at unfavorable suction side conditions.

Applications

Techical datasheet : AKH-X,AKH.pdf

The Sterling SIHI AOH pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level. The AOH is used when clear or turbid liquids without any abrasive particles are to be handled reliably and trouble-free.

The performance curve steepness admits a precise regulation of the pressure with a small change in capacity.

The AOH is used in domestic plants and agriculture for:

Techical datasheet : AOH.pdf

The Sterling SIHI ADH, CDH pumps are self priming side channel pumps capable of handling gas along with the medium and operates at a low noise level.

The ADH, CDH series are used to handle clear or turbid liquids, under high heads and without any abrasive particles, reliably and trouble-free.

Applications

Techical datasheet : ADH-CDH.pdf

Pumps of the series ASH were developed for handling liquid gases with vapour pressures of up to 80 bar. The high admissible nominal pressure and the optimum operation properties of the material combinations selected resulted in multiple application of this series, especially for handling carbon dioxide.

They are successfully applied:

Techical datasheet : ASH.pdf

CEH pumps are side channel pumps with NPSH inducer stage suitable to handle liquids which do not contain solid matters or abrasive admixtures.

The NPSH inducer stage allows the operation under unfavorable pumping conditions at suction side, also at positive suction heads lower than 0,5 m.

CEH pumps are applied:

Techical datasheet : Series CEH.pdf

AEH pumps are side channel pumps, applied in order to handle problem-free and without any leakage and economically clear or turbid, aggressive, valuable toxic or ill-smelling liquids which do not contain any solid particles or abrasive components.

AEH pumps are applied:

The Sterling SIHI SC pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

The SC is, due to its special design, very suitable for problem-free pumping of clean liquids at unfavourable suction side conditions. The SC can also be used for NPSHA of 0,4 - 0,65 m.

The SC is especially developed for:

Techical datasheet : SC.pdf

Vertical, extended tank pump essentially for handling liquids that are either boiling or stored at their vapour pressure. Particularly suited to AutoGas filling stations.

One of the primary features of this side-channel type of pump is the special suction impeller that requires extremely low levels of NPSH. CEB pumps have been specifically designed for use with Liquefied Petroleum Gas and other liquefied gases.

Techical datasheet : CEB.pdf

The Sterling SIHI DRV pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level. The DRV pumps are used when clear or turbid liquids with an aggressive nature, in varied concentration and temperature ranges and without any abbrasive particles, are to be handled reliably and trouble free.

Their applications cover the private, professional and industrial fields:

Techical datasheet : DRV.pdf