Piston Pumps and MotorsDesigned for intelligent vehicle management systems, product range brings you closer to your goals for reduced fuel consumption and high operator comfort. Trust Danfoss Power Solutions compact piston pumps and motors to give your transmission the power it needs with the low emissions that satisfy today's global regulations. To get more information please expand the product block by pressing on image or product title. To get detailed information about specific product you can download Technical datasheet file by clicking corresponding link. H1 Family of Pumps and MotorsThe H1 range is built around an advanced electrical control and available in a wide range of displacements. Working quietly inside, at the heart of the system, H1 will keep your application going - today, tomorrow, a lifetime. H1 Axial Piston Pumps | | | Designed for high and medium power needs. H1 offers higher output speeds, lower input speeds and a reduced total installed life cycle cost. H1 pumps feature common design technologies and assembly techniques. |
Greater Machine Efficiency - H1 pumps reduce rotating group, control and charge pump losses, which saves fuel consumption, frees power for other vehicle functions and enhances operating performance and productivity. Better efficiency means that you can use smaller engines on some machines, while you also reduce machine heat load and increase power to the ground.
Expanded Functionality - The market is expecting machines with enhanced operator and/or vehicle safety features and H1 offers numerous new options designed to address these issues.
Techical datasheet : H1 pumps.pdf
| | | | |
H1 Bent Axis Motors | | | Bent axis motors are designed to complement the growing family of H1 axial piston pumps. Featuring proven 32 degree bent axis technology, zero degree capability and higher overall efficiency, they offer a number of significant advantages. |
Higher Overall Efficiency - H1 motors provide significant improvements in overall efficiency. An optimized valve segment and piston design helps improve fuel economy and frees power for other vehicle functions, enhancing operating performance and increasing productivity.
Zero Degree Capability - A key feature of the new H1 motors is their zero degree capability. The ability to seamlessly reduce the angle to zero degrees means there is no torque interruption, or sudden change in speed when switching from, for example, work range to travel range. This enhanced control is not only more precise, but also improves the feel of the system during operation.
- Zero degree capability enables accurate anti-slip and torque control functions, which increase vehicle productivity and optimize power utilization. It is also possible to provide wheel assist solutions without the need for additional technology. Even true two-speed applications, for example a crop sprayer, can be supported by our H1 motors.
Techical datasheet : H1 motors.pdf
| | | | |
H1 Automotive ControlH1 Automotive Control system offers a combination of complete pre-engineered propel drive system functionality, consistent and reliable performance through the application of embedded electronics and TÜV certified SIL 2 functional safety level. H1 AC System | | | Sauer-Danfoss offers years of application expertise in a fully integrated, pre-tested Automotive Control System solution that's ready to be tailored to your vehicle requirements. |
Highlights - Reduced time-to-market for both new vehicles and new model year enhancements
- Reduced propel drive system development costs
- Reduced cost for functional safety (development, certification testing) to achieve vehicle certification according to European machinery directives
- Enhanced vehicle performance
- One-stop shopping for entire system (pump, motor, pedals, sensors, electronics)
- Comprehensive application expertise and 25 year experience with electronic automotive controls.
- Total technical support from vehicle concept through production and aftermarket
SD Product | Available sizes | H1 AC Pump | 45 cm³/rev (2.75 in³/rev), 53.8 cm³/rev (3.28 in³/rev) | 60 cm³/rev (3.69 in³/rev), 68 cm³/rev (4.15 in³/rev) | 78 cm³/rev (4.76 in³/rev) | 89 cm³/rev (5.44 in³/rev) | 100 cm³/rev (6.21 in³/rev), 115 cm³/rev (7.0 in³/rev), 130 cm³/rev (7.93 in³/rev) | H1 Motor | 60 cm³/rev (3.66 in³/rev) | 80 cm³/rev (4.88 in³/rev) | 110 cm³/rev (6.71 in³/rev) | S51 Bent Axis Variable Motor | 160 cm³/rev (9.82 in³/rev) | 250 cm³/rev (15.25 in³/rev) | S90 Fixed Motor | 42-130 cm³/rev (2.56-7.93 in³/rev) |
Techical datasheet : H1 AC Pump 45-53.8.pdf
| | | | |
Closed Circuit High Power Pumps and MotorsPLUS +1 compliant closed circuit axial piston variable pumps, fixed and variable motors and variable displacement bent axis motors are designed for high power propulsion and heavy work function needs. High Power Pumps and Motors | | | High power transmission solutions secure performance reliability in combines, crawlers, forest machinery and rollers. |
Highlights - Compact designs offering high power density
- Complete family of manual, electric and hydraulic displacement controls and electrical automotive controls
- Various motor displacements available in SAE flange, cartridge and DIN ISO flange configuration
- Motor ranges with fixed, 2-position and continuously variable displacement controls, including the zero degree option
SD Product | Displacement cm³/rev (in³/rev) | Maximum Pressure bar (psi) | Controls | H1 Pump | 78 (4.76) | Up to 480 (Up to 6,960) | Electrical | 89 (5.44), 100 (6.21) | - | - | 115 (7.0), 130 (7.93) | - | - | 147 (8.97), 165(10.07) | - | - | H1 Bent Axis Variable Motor | 60 (3.66) | 480 (6,960) | Electrical | 80 (4.88) | - | - | 110 (6.71) | - | - | 160 (9.76) | - | - | S90 Pump | 42-250 (2.56-15.25) | 480 (6,96) | Manual, Hydraulic, Electrical | S90 Fixed Motor | 42-130 (2.56-7.93) | 480 (6,96) | Not applicable | S90 Variable Motor | 55 (3.36) | 480 (6,96) | Hydraulic, Electrical | S51 Bent Axis Variable Motor | 60-250 (3.66-15.25) | 480 (6,96) | Hydraulic, Electrical |
Techical datasheet : H1 Pump 78.pdf
| | | | |
Closed Circuit Medium Power Pumps and MotorsPerformance, power density and functionality are standard features of Danfoss Power Solutions medium power axial piston pumps and motors for the diverse off-highway mobile market. Medium Power Pumps and Motors | | | Made for aerial lifts, skid steer loaders, vibratory rollers and forklift trucks. |
Highlights - Compact, low-weight pump and motor family for complete system designs
- Pumps available in stand-alone single or integral tandem configurations
- Direct displacement control and integral servo control technologies, ideal for remote manual, hydraulic or electrohydraulic control
- Motors configured for fixed or variable 2-position displacement, with SAE and cartridge mounting flange configurations
- Displacements available from 25-53.8 cc/rev for optimum application flexibility
SD Product | Displacement cm³/rev (in³/rev) | Pressure bar (psi) | Control Options | H1 Pump | 45 (2.75) | Up to 450 (6,525) | Electrical | 53.8 (3.28) | - | - | 60 (3.69), 68 (4.15) | - | - | Series 40 Pumps | 25 (1.53), 35 (2.14), 44 (2.68) | Up to 400 (5,800) | Direct | 46 (2.8) | 350 (5,075) | Manual,Hydraulic, Electric | Series 40 Fixed Motors | 25 (1.53), 35 (2.14), 44 (2.68) | Up to 400 (5,800) | Not Applicable | Series 40 Variable Motor | 46 (2.8) | 350 (5,075) | Hydraulic | Series 42 Pumps | 28 (1.71), 41 (2.5), 51 (3.11), 41 (2.5) | Up to 400 (5,800) | Manual, Hydraulic, Electric | L/K Motor | 25 (1.52), 30 (1.83), 35 (2.14), 38 (2.32), 45 (2.75) | Up to 350 (5,075) | Hydraulic | LPV Pump | 25 (1.52), 30 (1.83), 35 (2.13) | Up to 350 (5,075) | Direct |
Techical datasheet : H1 Pump Single 45-53.8.pdf
| | | | |
Closed Circuit Low Power Pumps and MotorsDanfoss Power Solutions top priorities are reliability and easy installation when we design closed circuit pumps and motors for low power applications. U-style and inline options separate variable pumps and fixed motors, giving you great engineering flexibility. Low Power Pumps and Motors | | | Made for turf care machines, compact utility tractors and specialty agriculture machines. |
Highlights - Compact, lightweight design
- Complete transmission family to meet the needs of the lawn and turf market
- Variable pumps, inline transmissions, U-style transmissions and fixed motors available
- High efficiency and low noise levels
SD Product | Displacement cm³/rev (in³/rev) | Pressure bar (psi) | Control Options | DDC 20 Axial Piston Pump | 20 (1.22) | Up to 300(4,349) | Direct Displacement control | BD Series Axial Piston Pumps | 6 (0.36), 10 (0.61), 21 (1.28) | Up to 245 (3,552) | Direct Displacement control | Series 15 Pumps And Motors | 15 (0.92) | Up to 310 (4,495) | Direct Displacement control | LDU 20 U-Style Transmission | 20 (1.22) | Up to 300 (4,349) | Direct Displacement control |
Techical datasheet : DDC 20 Axial Piston Pump.pdf
| | | | |
Transit Mixer DrivesAvailable for drum sizes of 6-12m³, their Plug and Perform closed loop drum control gives you the right mix of efficiency, low noise and operator comfort. Pumps, Motors, Gearbox and Electronic | | | Danfoss Power Solutions smart drive systems for transit mixers have a proven track record. Company guarantee outstanding control that keeps the drum turning, smoothly and reliably, on and on. |
Highlights - Reliable, durable drive system
- Easy to operate
- Constant drum speed
- No pump control wear or lock up
- Dashboard mounted control device
SD Product | Size | Control Options | Series 20 Pump | 70cm³/rev (4.27in³/rev), 89cm³/rev (5.43in³/rev) | Mechanical | TMP Pump | 70cm³/rev (4.27in³/rev), 89cm³/rev (5.43in³/rev) | Electrical | TMM Motor | 70cm³/rev (4.27in³/rev), 89cm³/rev (5.43in³/rev) | Fixed displacement | TMG Gear Box | 51.2kNm (37,763lb/ft), 61.2kNm (45,138lb/ft), 71.2kNm (52,514lb/ft) | For 6-12m³ drum | TME | Cabin and Remote Station | Closed loop |
Techical datasheet : Series 20 Pump.pdf
| | | | |
Open Circuit Axial Piston PumpsSeries 45 open circuit axial piston pumps are highly efficient, reliable and low in noise - in fact, everything you require for a highly responsive hydraulic system. Axial Piston Pumps | | | Series 45 pumps are a proven component in hydraulic systems for cranes, telehandlers, forklift trucks, forestry and agricultural machinery and numerous other mobile vehicles. |
Highlights - Pressure compensated (PC) and remote pressure (RP) compensated controls for high control system flexibility
- Load sensing (LS) technology for optimized hydraulic systems with maximum efficiency and energy conservation
- Range of mounting flanges for ease of installation
- Available in eight variable displacement sizes
SD Product | Frame | Displacement cm³/rev (in³/rev) | Pressure bar (psi) | Control Options | S45 | L | 25, 3 | 210-260 (3,045-3,770) | Pressure Control, Load Sense, Remote Pressure | K | 38, 45 | 210-260 (3,045-3,770) | Pressure Control, Load Sense, Remote Pressure | J | 45, 51, 60, 65, 75 | 260-310 (3,770-4,495) | Pressure Control, Load Sense, Remote Pressure | F | 74, 9 | 260-310 (3,770-4,495) | Pressure Control, Load Sense, Remote Pressure | E | 100, 130, 147 | 260-310 (3,770-4,495) | Pressure Control, Load Sense, Remote Pressure |
Techical datasheet : S45 Series.pdf
| | | | |
Other products from this manufacturer |